Fostex Pro Fostex RM-3DT Rack-Mount Stereo Monitor with Dante

Fostex Pro Fostex RM-3DT Rack-Mount Stereo Monitor with Dante

The RM-3DT is a rackmount monitor with built-in 10W × 2 power amplifiers equipped with Dante® audio networking, a feature developed by Audinate that enables the transmission of multiple uncompressed digital audio signals. Dante® * audio networking standard-compliant 1U rackmount stereo rack monitor with built-in amplifier. Dante® is a registered trademark of Audinate, Inc. Supports balanced analog input and Dante® input. Power-saving design with digital amplifier and switching power supply. 26-dot LED meter display is selectable from VU, VU+PEAK, VU+PEAK hold, and PEAK+PEAK hold. The display brightness can be adjusted in four levels. Either or both of the 2-channel digital signals extracted from the Dante® network signal can be output.

Speaker section: Unit: 110 x 40 mm cone type, magnetically shielded Impedance: 8 Ω Sound Pressure Level: 84 dB/W(1 m) Frequency response: 200 Hz to 20 kHz Power Amplifier Section: Maximum output: 10 W x 2 Residual noise: -50 dBV or less (DIN AUDIO) Distortion rate: 0.1% or less Dante Input: Connector: Input RJ45, Format: Dante Analog input: Connector: XLR-3-31 type, Rated input level: XLR (balanced): +4/0 dBu, Input Impedance: 10 kΩ min. Analog THRU output: Connector: XLR-3-32 type Phones: Connector: Φ6.3 mm stereophone, Applicable load: Impedance 16 Ω or more, Maximum output: 20 mW+20 mW (32 Ω, 1 kHz) Level meter: Display: 26-dot LED x 2, Reference level: analog XLR: +4/0 dBu General: External Dimensions: 482(W)×44(H)×284(D) (including protrusions) Weight: Approx. 3.5 kg Power requirement: AC100 V to 240 V 50/60 Hz Power consumption: 10 W